杭州轻质砖厂家电话
新闻动态
热点新闻
行业新闻
当前您的位置:网站大发彩票 >> 行业新闻

怎么样检验加气块质量的好坏

发布时间:2019-04-03    编辑:上海德新新型建材大发彩票    浏览次数:29次

 为了达到理想的使用效果,在使用之前需要对其进行检验,那么如何判断它的质量是否合格呢?下边小编为您讲解:

 
1、在两个对应面的端部测量其长度、高度以及宽度,各量两个尺寸;
 
2、平面弯曲然后对弯曲面的最大缝隙尺寸进行测量;
 
3、使用钢尺平整的放在山东加气块表面上,然后使用钢卷尺垂直于钢尺,测量最大深度;
 
4、观察加气块表面上是否有油污、是否出现层裂、疏松现象;
 
5、对砌块破坏部分的长宽高三个方向的投影尺寸进行测量。
 
 
In order to achieve the desired use effect, it needs to be tested before use, so how to determine whether it is of good quality? The following small editor explains for you:

1, measure its length, height and width at the ends of two corresponding surfaces, each measuring two dimensions;

2, the plane bends and then the maximum gap size of the curved surface is measured;

3, the use of steel ruler flat on the surface of Shandong gas block, and then use steel tape ruler perpendicular to the steel ruler, measuring the maximum depth;

4, observe whether there is oil pollution on the surface of the gas block, whether there is lamination, loose phenomenon;

The projection dimensions of the damaged part of the block in three directions are measured.



上一篇:没有了!      下一篇:加气块有裂缝的原因